NOKIA TA-1352 C21 FINGERPRINT STUCK ON LOGO OR FASTBOOT AFTER NETWORK UNLOCK WITH CHEETAH OR PANDORA OR CM2 FIXED

 NOKIA TA-1352 C21 FINGERPRINT STUCK ON LOGO OR FASTBOOT AFTER NETWORK UNLOCK WITH CHEETAH OR PANDORA OR CM2 FIXED

It seems like you're encountering an issue with a Nokia TA-1352 C21 device after attempting a network unlock using various tools like Cheetah, Pandora, or CM2. If the device is stuck on the logo screen or fastboot mode, it could be due to a variety of reasons including software corruption or incomplete unlocking processes.

Here are some potential solutions you can try:

1. Restart the Device: Sometimes, a simple restart can resolve software glitches. Try turning off the device and turning it back on to see if it boots up normally.

2. Factory Reset: If the device is stuck on the logo screen, you may need to perform a factory reset. This will erase all data on the device, so make sure to back up any important data if possible. To perform a factory reset, you typically need to boot into recovery mode. The exact method may vary depending on the device model, but it often involves holding down specific buttons while powering on the device.

3. Flash Stock Firmware: If a factory reset doesn't resolve the issue, you may need to flash the stock firmware onto the device. This will completely replace the operating system with a clean version provided by the manufacturer. You can usually find the stock firmware for your device on the manufacturer's website or through third-party firmware repositories. You'll need to use appropriate flashing tools like Odin (for Samsung devices) or SP Flash Tool (for MTK-based devices) to flash the firmware onto the device.

4. Seek Professional Help: If you're not comfortable with flashing firmware or if the above steps don't work, it may be best to seek assistance from a professional technician or the manufacturer's support service. They may have more advanced tools and techniques for diagnosing and fixing the issue.

Remember that performing any of these actions carries the risk of data loss or further damage to the device, so proceed with caution and make sure to follow instructions carefully.

If you did not solve it yourself please check our solution where we tried and succeeded by clicking on the solution link SOLUTION LINK.